1 / 1
Convaid Wheelchair Collapse Lock
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement catch for quick release detent
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution
This was created to replace a lock that otherwise would require replacing a wheelchair that costs in excess of $4000.
Note: this will also require drilling and removal of two rivets. I replaced them with Chicago binding screws that were adjusted to precisely fit, so as to not catch skin or hair of the occupant of the chair. Make sure that all burrs and edges are removed!
This is printed with PETG, and has been holding up very well.