Stormwater drain cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stormwater drain cover with 4mm holes so it can go under 7mm gravel allowing water to drain through the gravel
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was putting down 7m drainage gravel in the garden and I wanted the gravel to cover a stormwater drain so that the water would continue to drain but the gravel would be kept out of the drain. Normally I would buy a grate like https://www.bunnings.com.au/holman-100mm-pvc-dwv-grate_p4780016 at the hardware store, then cover it with flyscreen mesh to do this.
I worked out however I could model my own version of the drain cover using 4mm diameter holes. this would have the same effect but in a neater manner.
Its been in through a couple of storms now and seems to be working well. I have some ideas for improvement but am lazy enough to do that when necessary.
I printed it in PLA with a 0.4mm nozzle.