Stormwater drain cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stormwater drain cover with 4mm holes so it can go under 7mm gravel allowing water to drain through the gravel
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 46
- Makes
- 0
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was putting down 7m drainage gravel in the garden and I wanted the gravel to cover a stormwater drain so that the water would continue to drain but the gravel would be kept out of the drain. Normally I would buy a grate like https://www.bunnings.com.au/holman-100mm-pvc-dwv-grate_p4780016 at the hardware store, then cover it with flyscreen mesh to do this.
I worked out however I could model my own version of the drain cover using 4mm diameter holes. this would have the same effect but in a neater manner.
Its been in through a couple of storms now and seems to be working well. I have some ideas for improvement but am lazy enough to do that when necessary.
I printed it in PLA with a 0.4mm nozzle.