Original Prusa Enlosure (OPE) - Raspberry Pi Mount with 5" Display for Dan

If you have an original Prusa enclosure and want to use a Raspberry Pi 3/4 and the low-power Waveshare 5" IPS touch display with SKU: 24161 which you have mistakenly bought like Dan. 

Important: 

• Because the Waveshare 5" IPS display with the Pi mounted on the back is a little too tall to mount at a 45 degree angle to the enclosure, you need to raise the enclosure by 13 mm. You can do this with the double-height feet bracket, which is a remix of the original feet bracket.
• The Raspberry Pi display and touch input must be turned upside down. See attached PDF in “Files” to this model: Original Prusa Enlosure - Raspberry Pi Mount with 5" Display

Use the 12mm or 8mm mounts from the model here to attach it to the enclosure: Original Prusa Enlosure - Raspberry Pi Mount with 5" Display

You need the following parts:

• To attach the whole model onto the enclosure:
  • 2x M3 x 6 mm Allen screw for V2 with 8 mm thick mounts or 2x M3 x 10 mm Allen screw for V3 with 12 mm thick mounts
  • 2x M3 square nut
• To attach the mounts on the frame
  • 4x M2.5 x 8 mm Allen screw
• To attach the Rapsberry Pi onto the frame
  • 4x M2.5 x 8 mm Allen screw
• Waveshare 5" IPS Display (SKU: 24161)
• A Raspberry Pi 3/4
• Depending on your Pi: an angled USB adapter for the official power supply
  • PI 4: angled USB C adapter (https://www.aliexpress.com/item/1005005732457125.html)
  • Pi 3:  angled micro USB adapter (https://www.aliexpress.com/item/1005005276829854.html → V8RI - V8F)

The model is created with FreeCAD.