1 / 3
Original Prusa Enlosure (OPE) - Raspberry Pi Mount with 5" Display for Dan
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you bought the 5" Waveshare DSI IPS display with SKU 24161 mistakenly like Dan.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 577
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
If you have an original Prusa enclosure and want to use a Raspberry Pi 3/4 and the low-power Waveshare 5" IPS touch display with SKU: 24161 which you have mistakenly bought like Dan.
Important:
- Because the Waveshare 5" IPS display with the Pi mounted on the back is a little too tall to mount at a 45 degree angle to the enclosure, you need to raise the enclosure by 13 mm. You can do this with the double-height feet bracket, which is a remix of the original feet bracket.
- The Raspberry Pi display and touch input must be turned upside down. See attached PDF in “Files” to this model: Original Prusa Enlosure - Raspberry Pi Mount with 5" Display
Use the 12mm or 8mm mounts from the model here to attach it to the enclosure: Original Prusa Enlosure - Raspberry Pi Mount with 5" Display
You need the following parts:
- To attach the whole model onto the enclosure:
- 2x M3 x 6 mm Allen screw for V2 with 8 mm thick mounts or 2x M3 x 10 mm Allen screw for V3 with 12 mm thick mounts
- 2x M3 square nut
- To attach the mounts on the frame
- 4x M2.5 x 8 mm Allen screw
- To attach the Rapsberry Pi onto the frame
- 4x M2.5 x 8 mm Allen screw
- Waveshare 5" IPS Display (SKU: 24161)
- A Raspberry Pi 3/4
- Depending on your Pi: an angled USB adapter for the official power supply
- PI 4: angled USB C adapter (https://www.aliexpress.com/item/1005005732457125.html)
- Pi 3: angled micro USB adapter (https://www.aliexpress.com/item/1005005276829854.html → V8RI - V8F)
The model is created with FreeCAD.