1 / 3
Bookshelves without holes and drills and screws — zdjęcie 1
1 / 3

Bookshelves without holes and drills and screws

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stable bookshelve without drilling any holes in combination with wooden rods and cable ties.

Ocena
0 / 5
Polubienia
2
Pobrania
25
Wydruki
1
Wyświetlenia
305
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Public Domain

I needed some more space for books and  I have found a few niches under the roof.

but I did not want to drill or screw into the wood from the roof truss when I remove the shelf at some point.

I have therefore opted for a solution with stainless steel cable ties.
In addition, you need round wooden rods from the hardware store (I used 20 mm and 16 mm).
The Open SCAD - File is included, so you can adapt it.

this is very stable, even though I only printed it with PLA.

Tagi