Recreator 3D MK6 Fun Size Crutch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A support crutch for the larger offset for the Recreator 3D Fun Size.
- Ocena
- 4,5 / 5
- Polubienia
- 15
- Pobrania
- 78
- Wydruki
- 2
- Wyświetlenia
- 808
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mod
For the original Recreator 3D MK6 Fun Size, please visit https://www.printables.com/model/352729-pet1-plastic-bottle-filament-maker-with-the-recrea
Is your gear skipping?
If the second double-gear is skipping against your spooler's main gear, this mod is for you. This crutch fits neatly in the gap of the spooler's back panel. You will need a t-nut and bolt to fasten the crutch to the slotted profile.
Lube it up
Once installed and before replacing the large offset, place some grease or other lubricant in the cradle of the crutch to ensure that the offset can turn in the crutch with minimal friction.
Print suggestions
Print with at least 3-4 perimeters, 15% infill. Supports are optional but will help keep the hole for the bolt cleaner.