1 / 1
3.0 Inch Straight Through Exhaust Muffler | Read Desc
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Metal printers only, 50%+ Metal Filled PLA May work. It is a 3.0 Inch internal(3.2 inch external) Inlet Diameter Muffler
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 424
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Muffler I modeled with ridges inside and It is a straight through muffler like a tomei, you may print with metal filled filaments but id recommend a real metal printer, even then i doubt it would be quiet enough to be road legal unless you dont care, and then i guess thats ok.
it has an inlet diameter of 3.2 for the outside and 3.0 for the inside with .2 inch walls, outlet is 3.5
