1/18 car model stackable rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had previously tried to print a similar model for 1/43 cars and scale it but my printer's bed was not big enough.…
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 361
- Wydruki
- 5
- Wyświetlenia
- 2210
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
I had previously tried to print a similar model for 1/43 cars and scale it but my printer's bed was not big enough. That's why I redesigned the model and share it with you to save you time
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Doesn't Matter
Supports:
No
0.2
Infill:
20%
Filament:
filmentech PLA
Notes:
*the red part in the pictures called "level"
*the blue one called "roof"the model is wider than the model in the realistic pictures because some of the cars has wider side mirrors (you can see it break my lambo mirror)
Category: Vehicles