M30x1.0 adapter for Homematic eTRV-2 radiator thermostat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter allows the use of an eTRV-2 thermostat with a M30x1.0 radiator mount.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 138
- Wydruki
- 1
- Wyświetlenia
- 1081
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Thank you for supporting me!
This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!
Design
Homematic radiator thermostats come with a M30x1.5 screw. Some older radiator mounts used M30x1.0 screws instead. This adapter bridges the different screw elevations. It can serve as a general pattern to adapt radiator vents too.
For my setup the 9mm distancer worked best, but you may need a different size. 3 sizes are provided, for all others, please start from the .f3d file provided.
Print settings
- 0.4 nozzle, 0.2 print height
- 4 vertical perimeters, 60% infill
- either PETG or ABS/ASA, PLA will melt
- no support