M30x1.0 adapter for Homematic eTRV-2 radiator thermostat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter allows the use of an eTRV-2 thermostat with a M30x1.0 radiator mount.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 138
- Makes
- 1
- Views
- 1,081
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Thank you for supporting me!
This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!
Design
Homematic radiator thermostats come with a M30x1.5 screw. Some older radiator mounts used M30x1.0 screws instead. This adapter bridges the different screw elevations. It can serve as a general pattern to adapt radiator vents too.
For my setup the 9mm distancer worked best, but you may need a different size. 3 sizes are provided, for all others, please start from the .f3d file provided.
Print settings
- 0.4 nozzle, 0.2 print height
- 4 vertical perimeters, 60% infill
- either PETG or ABS/ASA, PLA will melt
- no support