Steelcase Leap V1 office chair headrest mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Headrest mount for office chair with plastic back.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 1362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
This is a mount for having a headrest on Steelcase office chairs, this chair is a classic in econometrics but most don't have headrests. This sturdy mount can be screwed (with wood screws-M5x20) directly in the plastic back. The mount has a 37x18mm hole with an inner nut for squeezing the headrest pipe with a M8 screw. There is a good reason those chairs don't have a headrest and this is because the headrest in fact weakens neck muscles, so I adapt the headrest height to work only when the chair is reclined (for a 1.76h user), but there is a vertical version too. The hole, the angle, and the height of the month must be adapted for your specific case, this is why I attached a .stp file. It is recommended that you print a light model and modify it before printing the final ‘’heavy infill'' one. Printing recommendation: pla/petg/abs-etc. wall-6, infill-adaptive cubic-60%