Steelcase Leap V1 office chair headrest mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Headrest mount for office chair with plastic back.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 39
- Makes
- 0
- Views
- 1,352
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
This is a mount for having a headrest on Steelcase office chairs, this chair is a classic in econometrics but most don't have headrests. This sturdy mount can be screwed (with wood screws-M5x20) directly in the plastic back. The mount has a 37x18mm hole with an inner nut for squeezing the headrest pipe with a M8 screw. There is a good reason those chairs don't have a headrest and this is because the headrest in fact weakens neck muscles, so I adapt the headrest height to work only when the chair is reclined (for a 1.76h user), but there is a vertical version too. The hole, the angle, and the height of the month must be adapted for your specific case, this is why I attached a .stp file. It is recommended that you print a light model and modify it before printing the final ‘’heavy infill'' one. Printing recommendation: pla/petg/abs-etc. wall-6, infill-adaptive cubic-60%