Counting matching models…
Car headrest cup holder. Made for standard 33cl drink cans. (The inner diameter of the cup holder is Ø70mm) For a shaft of Ø12mm (The hole is Ø12.25mm) Distance from the center of the hole to the inside of the hook. View the image below.
A dead-simple way to carry a rifle in a truck, SUV, or side-by-side. Hook the small end around your headrest post, drop the barrel into the large end. Tension holds it. No drilling, no adhesives, no hardware, no straps. Headrest posts:…
Thanks to CGGZiLLA work on Wallow86 inital design that gave me a perfect ground work to adapt the to whatever cheapish headrest I found on Amazon Canada. Truth to be told, I was sure I bought the same headrest…
Layer height: 0.2 mm No support required Standard print temperature PLA or PETG is recommended, but feel free to experiment with other materials!
Should you remove the headrests to gain some space when the seats are folded down, you lose the capability to fix stuff like a trunk protection cover on the headrest rails. Those dummy inserts let you still fix things. The narrow one is…
I wanted to mount a removable sun shade behind the headrests using magnets included with common rear window sun shades. This setup allows the shade to be installed or removed quickly and utilize the hook to hold a kid's tablet case while…
The factory headrest in the vertta pro chair pushes my neck very forward making it uncomfortable. This version brings it back 3,5cm improving ergonomics. The tolerances in this model could be a little bit better as the prongs don't fully…
I wanted to mount a removable sun shade behind the headrests using magnets included with common rear window sun shades. This setup allows the shade to be installed or removed quickly and utilize the hook to hold a kid's tablet case while…
imported to fusion and made to be flat on the bed and not need unneccessary supports.
This is a collection of parts I modeled out (just tinkercad) to mount emergency lights behind the headrests in the rear of a crew cab Sierra. I assume the double cab uses the same dimensions, but thats unconfirmed. The center seat I…
This hook is centered between the headrest posts for a Honda CRV. The posts are about 13 mm in diameter and spaced 141 mm apart. I printed from PLA with 3 wall layers and 20% infill.
The factory headrest in the vertta pro chair pushes my neck very forward making it uncomfortable. This version brings it back 3,5cm improving ergonomics. The tolerances in this model could be a little bit better as the prongs don't fully…
Keep your car organized and your passengers entertained with this 3D-printed multipurpose headrest accessory! This smart design combines a sturdy bag hook with a stable phone mount for the back seat. Make sure to orient on its side for…
A durable, low-profile hook that mounts securely to your vehicle’s headrest posts and can be removed in seconds. Includes printing plates for .5" (12.7 mm) and .555" (14.1mm) headrest posts and features non-slip contact points to keep…
A practical 3D printable headrest hook compatible with Hyundai Tucson IV , designed to mount on the metal rods of the front seat headrest. Perfect for hanging: jackets and coats handbags and backpacks grocery bags small shopping bags…
Road trips. Backseat Netflix. Data logging experiments. Whatever your mission, this headrest phone mount shows up ready to work. Designed for versatility and strength, this mount uses 9.5 mm diameter dowel rods (easily available at…
The wings on the side of my chair got caught on everything so I scanned it with a Seal Lite scanner and chopped off the sides. Printed in PETG with 0.6mm nozzle, normal supports, in the orientation shown. Threw in the original scan obj…
Our headrest angle setter broke down and we were unable to adjust and elevate kid's position. Here comes the more sturdy fitting part for the stroller. My recommendation is to use some hard and durable material (I used ABS) and crank up…
I printed this for my 2016 Ford F150 to hang my hats. I'm sure this would fit a lot of other Fords and other vehicles, but I've only tried it on my truck. Printed with PETG, not for strength but to withstand the hot summer heat in SoCal.
I originally designed these for my wife's Honda Odyssey minivan as very simple unobtrusive mounts so my kids had a place to prop up their phones on road trips. They ended up being so much more useful than we expected. Now we use them all…
This simple hook attaches around one of the support rods of a car headrest to allow backpacks, purses, or other items to be hung from the back of the seat. This hook is designed to be heavier duty than the previous model to be able to…
This design holds the MiniDSP UMIK-1 (or similar microphone) about ear level at the headrest. It utilizes the holder and tripod that comes with the mic to hold it in place. Simply place the tripod through the hole and open the legs out to…
I made this little holder to help keep my fly rods from moving around while driving with them assembled in the vehicle. I made it to fit an Isuzu Rodeo headrest, but might fit other vehicles. Inside to Inside on the rod measurement is…
This useful universal phone holder for rear passengers on the headrest of the front passenger
14.5mm hole for rod (fits VW Jetta MK6 and other Volkswagen headrests I guess) Print recommendations: petg 0.6mm outer perimeter width concentric top & bottom infill no supports
This is an adapter for the Ergotopia Masterback to move its headrest further back. Ever since i got this chair i felt like the headrest leaning forward way too much so i designed this adapter. I printed it in PETG with 4 walls, 25%…
When the headrest is removed, the bar behind the IKEA MATCHSPEL chair becomes loose and exposed. This cap secures the bar and covers its open top, providing a tidy and functional solution.
I got tired of my chair's headrest moving up and down constantly so I made these locks. Printed in PLA they snap on easily and when rotated they match the plastics of the chair so you never notice them. I include the Fusion 360 file so…
This is a secure and decent size headrest hook, which we use in the back of our 4WD. You'll find lots of uses for them. Designed using TinkerCAD Printed on a Prusa Mk4 using PLA, 5 perimiters and 25% infill. Print on the side and supports…
DE: Diese GoPro-Halterung passt perfekt in die Löcher der herausgenommenen Kopfstütze (getestet an VW Golf 5 und 7). Dabei kann die GoPro den Fahrzeuginnenraum oder die Straße durch die Front- oder Heckscheibe filmen. Wenn es Probleme mit…
The Hyken is a shpitz chair for the price, but the headrest is too low for me. After looking at others' solutions to this problem, I made this one which suits me. Hardware You need 2 M6 x 20 screws and 2 M6 nuts to attach the top.
Printed in black PETG. Perfect fit and sit flush with the plug.
I got tired of fatigue on the top of my head when using my headphones for long periods so I created these comfort pads for Audio Technica ATH-M50. They might also work for other brands if they are the same width (or you can possible scale…
Pro ukotvení jakéhokoli třeba kosmetického zrcátka stačí upravit model "Cross.stl" aby seděl na to Vaše. Je dobré přidat protiskluzové nožičky, aby se zamezilo vypadnutí zrcátka na horších cestách. Část "Cross.stl" je vysunutelná a lze…
This is an experimental model for a headrest mount that uses the small AbleNet Candy Corn switch. It hasn't been tested yet, and there are likely issues with it. I don't recommend using it until it is finalized.
I have made this pad to protect the headrest of my 2018 Subaru Crosstrek (XV). Size is appr. 170x110mm. Use flex material (TPU). Fitted it with non-residual double sided floor carpet tape.
English : If you have lost or broken the plastic piece that hold the headrest inside the headrest guide, make sure that you still have the metal string that make contact with this piece. if you do have it print the model “avec ressort” if…
This is a very strong iPad/tablet headrest mount I made for our school transportation dept. They transport young children long distances and wanted a way for the students to watch downloaded videos without the need to remove the…
Here an universal ram mount for headrest (front and rear) for a Mazda CX5 (2023) and the other similar model year. The ram insert sphere is 25mm diameter. Print: Material: PETG Layer: 0.15 Per seat you will need: 2 X M6x35 flat head bolt…
Requirements: 3/4pcs – M4 hex bolts, 8-15mm length allen key with ball end The bolts are a little tricky to install, but it's still easier than taking the whole headrest apart if the original mount is broken or if you want to modify the…
Car fishing rod hook – No supports required. Print 2 pieces and secure your rod or gear to your car headrest with Velcro straps.
Fits the rear headrests of a 2015 Nissan Leaf not sure what else. Made for a Itomoro Baby Car Camera but should accept any male ball mount that is around .6-.75 Socket Head Screws 2x M4X12 1x M5x10 Heatset Inserts 2x M4x5 1x M5x7 I…
These clips keep breaking so made a model to print spares. Category: Replacement Parts
Replacement of the headrest guide which has a habit of breaking, it replaces it in its place. (It is advisable to use at least ABS). Remember to grease the part well
Made this hook to connect to the headrest on a Ford Maverick. Allows me to hang my water bottle, that is too big for the cup holders, behind the passenger seat. Swivels on turns but the motion is limited by the seat back. Probably could…
The parts should be printet in a temperatureresistant material to withstand the heat in the car on a sunny day. The parts are connected with a 6X12 mm flat head machine screws. (Printet threads in base) The perfect fit is achieved with a…
This is a hook to hang your hard hat in a vehicle from the head rest post.
The rear headrest is not completely removed. To remove it completely, you need to insert it into the hole and press, then the headrest will come off. made in the program: Autodesk Inventor Filament material: COPET Resolution: 0.2mm
Anything within your reach. Hang your purse, emergency kits, trash bags, just about anything you'd need within arm's reach. Simple print in place design without the need for additional supports. I recommend printing the file the includes…
Print Settings Rafts: No Supports: Yes Resolution: 0.3mm Infill: 100% Filament brand: Doesn't Matter Filament color: Doesn't Matter Filament material: Doesn't Matter
I really wanted a headrest for my Mirra 2 chair but couldn't find one of reasonable quality so I bought the Engineered Now headrest for the Aeron, which was getting pretty good reviews on Reddit and forums, and made an adapter to allow me…
A headrest for bedframes and mattresses works with both professional headrest pillows, travel pillows and rolled up towels. Can be disassembled for storage and transportation. Attention: For the bedframe mount you ll need to check your…
I am allergic to a lot of stuff - tree pollen, ragweed, cat dander, household dust, you name it. We always try to keep tissues in the car, but the boxes often get crushed or misplaced. This gadget uses a car seat headrest to mount the…
Manually copied the STL from https://www.printables.com/model/99035-car-seat-headrest-hook “Car Seat Headrest Hook” by M 3D in Fusion 360 and lengthened by approximately 22mm to fit seats in a 2025 Honda CRV Sport-L Hybrid. Close copy of…
Headrest cupholder for Renault Trafic II or for 14mm shaft Print in PETG, ASA, ABS
My dog rides in the back of my Subaru with the rear seats down to give him room. He is restrained with a harness, but he still sees the gap between the front seats as an invitation to try to climb up into the front. I created this bracket…
Have you ever had the problem that your tender machinist forehead got all cold and numb when pressing it against the window of your CNC-machine? Do not be afraid, I got you covered! Get yourself a neck pillow, print out the parts for…
An easy to mount headrest phone or tablet holder. Can be mounted with M3 screws. You need 4 screws and 4 nuts to mount a pair. Can be folded inwards to clear out of the way. Just print the hooks in the orientation shown in the screenshot.
Simple headrest hook to fit the headrest posts on my Nissan Rogue. The idea was to have a hook to put my helmet or riding bag. Very sturdy and can hold my cooler bag full of 6 full water bottles. Made out of PETG to handle the heat. The…
This is a headrest stopper I designed for the Atlas Headrest add-on for the Herman Miller Aeron Chair. I found that, for my headrest at least, no matter how much I tightened the horizontal headrest slider, it would move when I applied…
i remixed jodo2017 's tablet mount to work with a different tablet Holder using a screw on. There are two versions, one for the front-seat headrest and one for the back-seat headrest, which is a little les wide than the front-seat…
Designed this as a need for the kids on long road trips when they just want to watch a movie. To avoid having to hold the tablet the entire time they can just mount it into the universal tablet holder attached to the back of the headrest…
Car headrest hook notebook, laptop, pc holder diameter of headrest rod 14mm Use only wgen car stand I use 14" old notebook. I think new 15"will be ok. Ideal for campervans Print settings 0.2mm layer 8walls 30%infill No supports
This adapter fits into the interface located in the headrest of the Smart ForFour, allowing for easy attachment of accessories such as smartphone mounts or other holders. Features: Perfect fit for Smart ForFour headrest interface Easy…
My headrest has been modified from the original setup to be flipped up for more clearance. You can find that tutorial here. My venerable staples Hyken chair started to get a loose headrest. When I would lean against it, it would tilt up…
This smartphone holder is designed specifically for the Google Pixel 9 Pro XL withe the official Google Case and is made to be mounted onto the separately available Headrest Interface Adapter – Smart ForFour . It can be securely attached…
Einfacher Haken, passend für die Kopfstützenstreben der Vordersitze im VW T6.. Wird eingehängt, kein Werkzeug nötig. Geeignet zum Aufhängen von Taschen, Jacken, Einkaufstüten usw. Druck in PETG mit nur Perimetern empfohlen (kein Infill) –…
Simple hook for car headrest for backpack / groceries / purse, etc. Sliced using ABS in PrucaSlicer. PETG may be an alternate option. Infill = 60% ( Changed from 30% ) Infill Style = Cubic ( for added strength ) Best printed on edge, with…
This adapter makes the Xtronic Smartphone holder compatible with the Tesla headrests. Just remove the suction cup piece and replace it with the print. Now you can stick the flat part of the print between the seat and the headrest to get a…
I had the problem with my Sihoo Doro C300 that the headrest rotated unintentionally every time I leaned against it. For this reason, I modeled a bushing that prevents this adjustment. By replacing this bushing, the headrest always remains…
An accessory loop that fits in the headrest holes of some vehicles. Sizes here are 13.8mm and 12.5mm.
Kopfstützenhalter für das Fire Tablet 10" Kids Edition. Der Halter passt nun an alle Kopfstützen. Die Halter laufen in einer Schiene und sind somit anpassbar an jede breite. Passt auch beim Fiat Panda wo die Metallstäbe verkleidet sind.…
These are replacement headrest pivot plates & pin for the Mifold Hifold fit-and-fold booster seat that are prone to breaking especially if your kids are constantly fighting each other. Model is provided as is and I'm not responsible of…
imported to fusion and made to be flat on the bed and not need unneccessary supports.
Hello, Today for you Hook, Car Holder for Headrest . Suitable for placing bags, clothes, or maybe even clothes hangers. Suitable for traveling!... everything important in one place. For proper functionality, you need to use a Printing…
Printed in ASA Prusa Artic White No support needet.
Headrest for under the mattress so that babies lie in an elevated position in their crib or stroller. Can also be used as a laptop stand as it is 32 cm wide
A remix of a simple headrest mount for the Amazon Fire HD 10 Kids Pro tablet. It fits the Opel Zafira B and likely many other models with a center-to-center distance of approximately 15 cm. I modified the model in Anycubic Slicer Next so…
Nowhere to mount your rear channel speakers in your sim rig? Or have them mounted where the mount is in the way? Now you can mount your rear channels speakers nice and tight to the body of the seat with minimal space interference. A seat…
Version 2 of my headrest for bedframes and mattresses works with both professional headrest pillows, travel pillows and rolled up towels. Now more sturdy and and with a lip to hold towels and travel pillows in place. Can be disassembled…
Print with ABS or PETG if you live in a hot country otherwise it may deform. I suggest using 40% infill with the Gyroid pattern Made in Fusion 360
While nifty, the Chrysler Stow-n-Go seats have a running MAJOR design flaw in them. The whole thing is injection molded out of Polypropylene (PP in an Automotive cab of all things…) and there is a deliberate planned obsolescence item of…
This model is a headrest riser adapter designed to lift the headrest of an office chair by a few centimeters, improving ergonomics and comfort for taller users. Hole spacing: 5.8 cm center-to-center Screws : M6 Use case: Ideal when your…
🧩 Modular Car Headrest Hook – Adjustable Length Organizer Keep your car clean and organized with this modular headrest hook system ! It easily attaches to the metal post of your car’s headrest , letting you hang bags, purses, grocery…
I wanted to position a remote speaker for my ham radio somewhere that I could hear it over the road noise. I found this little speaker and designed a bracket to mount it to my headrest. This fits my RAM 1500 pickup truck. The headrest…
My Hyundai Santa Cruz had poor rearward visibility so I removed the headrests from the back seats. However I still needed the rods to attach accessories to. I designed these to fit my 2025 Hyundai Santa Cruz, this may work for other…
In the photo, a hook with a 14mm hole is installed in a Jeep Patriot. Available in two versions: 1. Disassemblable, for cars with a non-removable headrest. 2. Solid, for cars with a removable headrest. The disassemblable version requires…
Volvo Part #9124138 This part often falls off after the plastic tabs holding it to the headrest break off. This is a quick print to repair the part, avoiding a costly replacement. Simply print and glue where shown in the photo. Be sure to…
Shown here printed in PCTG and PA6. The PLA prototypes lasted a few months but drooped slightly due to heat in the vehicle.
The headrest on my Bluetooth headset broke, so I designed and printed a replacement. Designed in Fusion 360. Printing Instructions Printed in Ninja Flex, 0.2mm Needs flexible filament / TPU, any brand should work If you print this, please…
Original model is excellent and fits brilliantly as intended. However, the proximity of the switch console to the headrest mounting point was causing a tight and awkward fit on my vehicle (2020 Toyota 4Runner). I needed more distance…
I lost the push button for one of the headrests in my skoda fabia. It doesnt work perfectly, but better than no push button.
LiberNovo Omni Headrest Extension Description This is a replacement for the LiberNovo Omni headrest support to extend the height. Assembly The parts are assembled with 1/4-20 threaded rod. Included Files STL - Ready for 3D slicing.…
This is a collection of parts I modeled out (just tinkercad) to mount emergency lights behind the headrests in the rear of a crew cab Sierra. I assume the double cab uses the same dimensions, but thats unconfirmed. The center seat I…
A hook that fits the shaft of the headrests in a toyota truck. you can hang gear, bows and even your wifes purse on it. The hook is offset to print with the least amount of supports. You can also print two hooks and they can pivot in…
![[EXPERIMENTAL] Headrest Mount for Small Candy Corn Switch](https://media.printables.com/media/prints/1188557/images/8935877_bad6bf69-7586-4c0e-b69a-0af861b0ea45_d2a5143a-f0ce-473f-b454-9709ca39a6c2/candy_corn_headrest.png)
