Headrest Hook for Automobiles
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.57 – €3.15 net (excluding VAT)
For file: Headrest_Hook_V2_0.2mm_PLA_MK3S_2h51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.86 excluding VAT (range midpoint).
- Weight reported by the author
- 36 g
- Print time reported by the author
- 2.85 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple hook to add to the back of your car seat for hanging anything at your convenience.
- Rating
- 4.667 / 5
- Likes
- 76
- Downloads
- 364
- Makes
- 6
- Views
- 1,351
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Anything within your reach. Hang your purse, emergency kits, trash bags, just about anything you'd need within arm's reach.
Simple print in place design without the need for additional supports. I recommend printing the file the includes the support and have included a print file with 100% infill for strength and a brim to help with adhesion. If you find bed adhesion to be an issue, try with a brim.
The hook diameter is 15mm, this is adequate for my vehicles, but if you encounter a larger size or different shape please let me know! I'll be happy to upload other versions to accommodate.
02/03/2022 Update: I've added a V2 model. V1 is better if your seat is reclined, and V2 is better for a more upright seat. The provided .gcode has been test printed and prints fine on my mk3s.