Locked Headrest for Sihoo Doro C300 Chair
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.36 – €0.44 net (excluding VAT)
For file: Sihoo Bushing PETG.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.40 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 25.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fixes the rotation axis of the Sihoo Doro C300 headrest so that it no longer moves unintentionally.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
I had the problem with my Sihoo Doro C300 that the headrest rotated unintentionally every time I leaned against it. For this reason, I modeled a bushing that prevents this adjustment.
By replacing this bushing, the headrest always remains in the same upright position. Adjustment is therefore no longer possible.
Installation instructions
- Remove the two screws from the headrest.
- You can now remove the headrest and replace the bushes.

- To install, first insert a bushing and screw it tight. Make sure that the bushing is correctly connected to the opposite side and lies flush.
- After assembling the first socket, assemble the second one.
You can replace the bushings at any time and restore the chair to its original condition.