1 / 4
Multicopter FC Cover for 45 x 45mm footprint, fully parametric (OpenSCAD) — zdjęcie 1
1 / 4

Multicopter FC Cover for 45 x 45mm footprint, fully parametric (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cover for Flight Controller of Multicopter, e.g, X525 with Crius Board. Uses the same M3 screws which hold the FC

Ocena
0 / 5
Polubienia
0
Pobrania
18
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Cover for Flight Controller of Multicopter, e.g, X525 with Crius Board.

Uses the same M3 screws which hold the FC in place.

Pyramid shape is designed with thin walls to print without support structure.

Instructions

You can adapt size, height and screw diameter in OpenScad source file. Prints well in PLA without support structure.

Use Nylon M3 screws to fix it on top of the FC PCB.

Category: R/C Vehicles

Tagi