1 / 4
Multicopter FC Cover for 45 x 45mm footprint, fully parametric (OpenSCAD)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover for Flight Controller of Multicopter, e.g, X525 with Crius Board. Uses the same M3 screws which hold the FC
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 18
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Cover for Flight Controller of Multicopter, e.g, X525 with Crius Board.
Uses the same M3 screws which hold the FC in place.
Pyramid shape is designed with thin walls to print without support structure.
Instructions
You can adapt size, height and screw diameter in OpenScad source file. Prints well in PLA without support structure.
Use Nylon M3 screws to fix it on top of the FC PCB.
Category: R/C Vehicles