1 / 2
Jamica 300, Umbrella replacement/repair part, Ampelschirm Ersatzteil — zdjęcie 1
1 / 2

Jamica 300, Umbrella replacement/repair part, Ampelschirm Ersatzteil

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I desigend a replacement part for our parasol after the original part is broken.

Ocena
0 / 5
Polubienia
11
Pobrania
51
Wydruki
0
Wyświetlenia
382
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Replacement parts for a sunshade with 48 mm Tubes in our case the Jamica 300 sunshade The original Part is broken at the connection opposite the lever. The original part has unfortunately ended up in the trash and a replacment part was no longer available for purchase. Therefore I can't attach it as a picture. Because of the high load the broken part could not be glued. I printed it in PETG for more durability and since know it works fine.

 

Ersatzteil für einen Ampelschirm mit 48 mm Rohrdurchmesser in meinem Fall das Sonnenschirmmodell Jamica 300 Das originaleTeil ist an der Verbindung gegenüber des Hebels gebrochen. Das original Teil ist leider im Müll gelandet und ein Ersatzteil war nicht mehr zu erwerben. Daher kann ich es leider nicht als Bild anhängen. Wegen der hohen Belastung konnte das Teil nicht geklebt werden, daher habe ich das Teil auch in PETG gedruckt. Bis jetzt funktioniert es sehr gut.

Tagi