CoreXY Printer electronics case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my own custom build 3D printer which I made from lots of salvaged parts from different 3D printers
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 460
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Currently have the screw alignments for PSU with 150mm x 50mm screw pattern on the bottom center and right cases. I removed the top cover of the PSU and attached 2 8cm fans on it in series. Basically I am running them at half speed for noise reduction.
Ramps 1.4 mount on the bottom left (Alternative cover is for an XBox fan which I salvaged from an old broken xbox)
Raspberry Pi 4 on top center (Alternative cover having a cooling fan holes which I salvaged from Ender 3 V2 extruder)
Top left and right boxes currently empty and sitting over there for possible future upgrades.
Those are huge parts so measure twice and print once.
Buy me a beer
PayPal.Me/cagataykilinc