CoreXY Printer electronics case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my own custom build 3D printer which I made from lots of salvaged parts from different 3D printers
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 0
- Views
- 460
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Currently have the screw alignments for PSU with 150mm x 50mm screw pattern on the bottom center and right cases. I removed the top cover of the PSU and attached 2 8cm fans on it in series. Basically I am running them at half speed for noise reduction.
Ramps 1.4 mount on the bottom left (Alternative cover is for an XBox fan which I salvaged from an old broken xbox)
Raspberry Pi 4 on top center (Alternative cover having a cooling fan holes which I salvaged from Ender 3 V2 extruder)
Top left and right boxes currently empty and sitting over there for possible future upgrades.
Those are huge parts so measure twice and print once.
Buy me a beer
PayPal.Me/cagataykilinc