AMS Spool Adapter for Esun Cardboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are a lot of great options out there but this is my take on those. Fits tighter and has an anti-rotation stud.
- Ocena
- 4 / 5
- Polubienia
- 83
- Pobrania
- 920
- Wydruki
- 4
- Wyświetlenia
- 4891
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are a lot of really great options out there for adapting cardboard spools to fit the Bambu AMS but this is my take on that. The main change is that this is specifically designed to fit over the cardboard Esun spools. Not meant for removing filament from original spools. This design fits the center hole much tighter and makes use of the anti-rotation hole near the center bore. There is a version without the stud and a smaller diameter center hub as well.
Another difference is that this uses threads of my own design specifically for 3D printing. Instead of 60 degrees, they are 100 degrees and printed great on my X1 Carbon. Models were exported using Solidworks with the settings tightened up for STL model generation.
Outside diameter is 201mm. The threaded stud side does not change. 3 versions of the nut side are available to hopefully fit other spools. The versions supplied are; Esun diameter and anti-rotation stud, Esun diameter but no anti-rotation stud, and 50mm diamter with no anti-rotation stud. Again, any of the nut sides will work with the stud side so that fewer pieces are needed.
Step now included so that it can be made to fit other spools. Allowed remix culture but with attribution. The thread profiles are probably the bit that I am most pleased with on this.