Simple Carabiner Clips - Style them your way!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Want an easy but stylized personal carabiner clip in the perfect size - then print this one! For backpack or keychain..
- Ocena
- 4,846 / 5
- Polubienia
- 293
- Pobrania
- 1162
- Wydruki
- 17
- Wyświetlenia
- 4089
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
| Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models, get access to exclusive models, and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my popular models |
If you need a simple but effective carabiner clip/hook to attach a flashlight or something else to your backpack before a trip, or need a stylized and useful keychain - or something else - here you go :-) After a week of prototyping and testing, this is the result. Hope you like it! For styling and print tips - read below!
PLEASE NOTE: THESE ARE OF COURSE NOT FOR CLIMBING OR OTHER HEAVY LIFTING!
If you like my models - please follow me on Printables for more free models to come!
Need bigger or thicker versions? - try scaling in the slicer or please let me know in the comments!
Overview
The carabiner model comes in 2 types - and in multiple sizes!
- The number in the file name is the length of the carabiner in mm.
- The Thick version types, is wider, and suitable for customization (fx. exposed infill - more below!)
Remember that all of the files can be scaled in 1 or more dimensions in the slicer for even more customization!
| More practical prints? I got you covered! Check out this collection of practical models - everything from tools to storage solutions. |
Print instructions
For all carabiners i recommend trying with your filament and different sizes and thicknesses.
- Speed on first layer: 50% (or less) (To ensure good bed adhesion and perfect fit)
- Supports: NO supports - that would prevent you from spinning the faces afterwards.
To style them a little I suggest you use the Thick versions!, and to show the infill, do the following (in Prusaslicer):
- Layers and perimeters → Horizontal shells → Solid layers → Top: 0 + Bottom: 0
Infill example (but experiment and find your personal style to look awesome on your backpack!!):
- Infill → Fill density: 25%
- Infill → Fill pattern: Honeycomb
Alternative: hide top/bottom layers as shown above - and hide the infill too! This create a super stylized look - but please be aware that the carabiner becomes super weak! Maybe increase the perimeters to your liking to make it a little stronger..
Happy printing!