Angled Desk Speaker Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slightly raised, 10° angled eye-pleasing speaker stand for your desk. (e.g. Edifier R1280T/DB)
- Ocena
- 5 / 5
- Polubienia
- 99
- Pobrania
- 726
- Wydruki
- 12
- Wyświetlenia
- 2896
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A slightly raised, 10° angled eye-pleasing speaker stand for your desk.
Originally created for the classic Edifier R1280T/DB, this speaker stand will most likely fit any speaker with a minimum length and width of 160 x 120 mm (6.3 x 4.72 in).
If you're using the Edifier R1280T/DB, the speaker stand works with both, the rubber feets attached or removed. If the rubber feets are removed, the speaker will fit right onto the stand.
Minimum print bed size: 170 x 130 x 50 mm
Easy and quick to print, no support necessary, simple assembly.
Despite the addition of some tolerance, inserting the wedge may require a bit persuasion.
What if I need a different angle?
Since not all desks and setups are the same, I also attached a 5° and 15° angled version.