VW Passat air-duct lever UPDATE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As the model name indicates, a printed version to replace a missint air-duct lever. Designed for VW Passat 2017
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 134
- Wydruki
- 0
- Wyświetlenia
- 1093
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE 10.7.25
Made it much stronger for more longevity more reliability. See new files with “v3”.
I deleted all the old files.
I had two requirements in mind:
- These levers consist of two parts in the original. The first part is mounted from the rear and takes over the adjustment of the veritcal slats. The second part is inserted from the front and connected to the rear part. That part takes over teh adjustment of the horizontal slats.
Whoever, I wanted a part, which is easy mounted by anyone, without the need to take out the duct. Therefore my first requirement was, it has to be possible to mount from the front.
- I wanted it to be easy to print, printed in place, and printable without support.
I achieved almost everything from the top, but I needed some small supports on the back part. These supports are modeled in the 3D model, and can be easily removed with a sharp knife.
This modell is suiting the VW Passat from 2017, 2.0 TDI
Whoever, my wife is also missing one for her VW Golf. I will design that as well and upload it some time soon.
Printed with 0.2 layer, 100% infill, PETG