Easy dial indicator mount for Prusa MK3s
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dial indicator holder that can be quick and easily mounted onto the Prusa MK3s extruder and is rigid enough…
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 289
- Wydruki
- 2
- Wyświetlenia
- 3034
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a dial indicator holder that can be quick and easily mounted onto the Prusa MK3s extruder and is rigid enough for precise measurements.
It uses my Universal tool carrier plate to interface with the extruder body. (The tool carrier plate is included in the files)
It will work for most of the cheap dial indicators available on Amazon, Ebay, Aliexpress and so on, since they share almost the same dimensions & shape.
You should print the dial holder part with enabled supports or even better, a support enforcer in PrusaSlicer placed at the top end of the part, so that it covers the bridged area.
Please be slow and gentle when moving axis and disable crash detection when using, as the printer usually will auto-home after a crash and crash the extruder again.
Print instructions
Print as you like. Please use supports or - even better - a support enforcer on the top end of the long part (to cover the bridged section, as shown in the last picture)