Filament Storage - Free Standing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Free-standing filament storage rack. Fits 1kg (~200mm) and smaller spools.
- Ocena
- 4,929 / 5
- Polubienia
- 167
- Pobrania
- 1011
- Wydruki
- 12
- Wyświetlenia
- 4442
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a free-standing filament rack that will hold 1kg (~200mm) spools. The holes are 20mm with set screw holes that can secure the dowels with M3XWhatever screws. Mine were a little loose because I had ¾ X 33-inch dowels, so the screws are m3x5, and everything is nice and snug. This will fit on a Bambu Lab build surface, as shown in the pictures.
As shown, Overture Matte Red PLA with 3 perimeters at 0.2mm layer height. 15% gyroid infill.
I'm thinking of making a bracket to stack these even higher. If you're interested in that, let me know. Otherwise, I'm off to the next thing.