Filament Storage - Free Standing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Free-standing filament storage rack. Fits 1kg (~200mm) and smaller spools.
- Rating
- 4.929 / 5
- Likes
- 167
- Downloads
- 1,012
- Makes
- 12
- Views
- 4,457
- Reviews
- 14
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a free-standing filament rack that will hold 1kg (~200mm) spools. The holes are 20mm with set screw holes that can secure the dowels with M3XWhatever screws. Mine were a little loose because I had ¾ X 33-inch dowels, so the screws are m3x5, and everything is nice and snug. This will fit on a Bambu Lab build surface, as shown in the pictures.
As shown, Overture Matte Red PLA with 3 perimeters at 0.2mm layer height. 15% gyroid infill.
I'm thinking of making a bracket to stack these even higher. If you're interested in that, let me know. Otherwise, I'm off to the next thing.