45mm Microphone Shock Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A microphone shock mount designed for mics approx. 45mm in diameter. In the pictures it is shown with the Scarlet Solo…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
A microphone shock mount designed for mics approx. 45mm in diameter. In the pictures it is shown with the Scarlet Solo mic, but it should work with other similarly sized mics. Designed to be attached to a 5/8" screw.
Printed without supports, 60% infill. You might want to use more infill on the 'ring to pole mount' part as it is under a fair bit of load.
As well as the 3D printed parts, you'll also need:
Bolts + nuts - 2 x M4x15mm (longer for bigger mics) + 1 x M4 x 25mm
Some 0.125mm elastic cord - e.g. https://www.amazon.co.uk/gp/product/B08C9GBD3L/
Optional - some grippy sponge strip 10mm x 2mm - e.g. https://www.amazon.co.uk/gp/product/B0085EAV2A/
Yeti_Ring.stl is taken from the Blue Yeti Microphone Shock Mount referenced as a remix.
Category: Music