1 / 5
Uppababy Cruz V2 Wheel brake repair part
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Part to replace broken brake "spokes" in the wheel of a Uppababy Cruz V2. Model with 4 new spokes to glue in.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 973
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (10)Powiązane
One of the wheels on my Uppabay Cruz V2 baby trolly had a lot of slack/movment when i put the brake on. So i removed the wheel han foud out that a lot of the spokes where the brake pin engages had broken.
I made this part to replace 4 broken spokes in a row. Works grat and saved me 40$ on a new pair of wheels.
How to use:
- Print the part with strong settings.
- In the wheel> Carv out or dremel away the remaining parts of the broken spokes. I used a sharp small wood carving chisel but u can use a dremel.
- Glue in the 3D printed replacement part with a bit of super glue.
Not sure if it will fit on Uppabay Vita or Cruz V1.