1 / 5
Uppababy Cruz V2 Wheel brake repair part
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Part to replace broken brake "spokes" in the wheel of a Uppababy Cruz V2. Model with 4 new spokes to glue in.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 52
- Makes
- 1
- Views
- 973
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
One of the wheels on my Uppabay Cruz V2 baby trolly had a lot of slack/movment when i put the brake on. So i removed the wheel han foud out that a lot of the spokes where the brake pin engages had broken.
I made this part to replace 4 broken spokes in a row. Works grat and saved me 40$ on a new pair of wheels.
How to use:
- Print the part with strong settings.
- In the wheel> Carv out or dremel away the remaining parts of the broken spokes. I used a sharp small wood carving chisel but u can use a dremel.
- Glue in the 3D printed replacement part with a bit of super glue.
Not sure if it will fit on Uppabay Vita or Cruz V1.