VENEC saddle bike rearlight mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The two recesses easily fit on the bumps with the threaded inserts. For the assembly you need two M5 x 10 screws. I…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The two recesses easily fit on the bumps with the threaded inserts. For the assembly you need two M5 x 10 screws.
I made this part out of PLA, but there are better materials because PLA doesnt like
UV radiation that much.
The cylinder has a diameter of 31 mm and a hight of 10 mm.
I wish you fun trying out my design. If you like my work... take a moment and like or post a make to support me. :-)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0,2
Infill:
20%
Filament: SUNLU PLA GREY
Category: Sport & Outdoors