Angled MK2.5s+ bed cable cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angled for Mk2.5s+ printers inside the "IKEA enclosure" to avoid squishing the cables against the back of the enclosure.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 70
- Wydruki
- 2
- Wyświetlenia
- 328
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I have my printer inside the IKEA enclosure and had modified the MK2S cable cover with an angle to avoid squishing/jamming the cables against the back cover of the enclosure.
After modifying my MK2s to be an MK2.5s+, the angled bed cover I had on the MK2S no longer worked. It no longer fit on the bed due to the screws for the cable connectors being tall, which I fixed by redesigning the cover to allow for the screw heads. However, after that modification, it still did not work because the positioning of the extruder cables in the MK2.5s+ lower than in MK2S so those would hit the angled cover and drive the bed downwards, NO GOOD!!!
So, I took both PRUSA cable covers (the one from the MK2S and the one for the MK2.5s+) and remixed them into this one with a 60 degree angle for the cable.
I added cutouts for the cable insulation (else the cover would not rest flat without exerting force).
Slice at 0.20mm, use 20% infill or higher. Print using Polycarbonate (anything else will melt if you print PC, even if seldom).