1 / 3
Fight Club Soap Container with Magnets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of HD3Ds model, added 6mm x 3mm magnets to hold lid firmly in place.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 427
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
Remixed model to utilise 6mm x 3mm magnets x8 to hold lid firmly.
Edited in Bambu Studio, can change negative part parameters to change depth of magnet (currently set at 3mm as the ones I have measure under 3mm).
If changing magnet depth, dont forget to adjust Z height to sit flush with cylinder surface.
Printed in shown orientation with support to give clean exterior appearance.
