Simple Switch - Living Hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simply switch to use with a "LilyPad Button Board" or alike.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This simple switch (50*50mm²) can be used as housing for a LilyPad Button Board to get a bigger touch surface. Keep in mind that there a different versions with different heights. Mine is 1.6mm, but they can be smaller, too. I have fixed it with double-sided adhesive foam tape (1mm high) inside the case.
The case is 0.1mm wider than the switch to fit easily. You maybe need to adjust this, depending on the precision of your printer.
For those, who need a bigger or smaller button, I added the blend-file for remixing.
Print setting can be seen in the 3mf-file.
If you have any questions feel free to ask.