Bambu AMS Stand Leg Extensions 4" Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Riser for MihaiDesigns AMS Stacking Stand to raise it up 4".
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 3259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I wanted to raise my Bambu AMS up just a bit so I could add the drawers underneath without having to modify and print another stand out. This simple design just slips underneath MihaiDesigns AMS Stand and raises it up about 4", just enough for chenwei's drawers to fit underneath the bottom AMS. Need to print 2 of them.
I printed .2mm layer height, 15% infill, 3 walls (just for some extra strength). Stand should slip right in. I recommend first dropping the design on the build plate and just printing the top ½"-1" just to test fit to make sure it fits your stand. You can scale up/down for a tighter or looser fit.
Compatible AMS Stand https://thangs.com/designer/MihaiDesigns/3d-model/AMS%20stacking%20stand%20for%20Bambu%20Lab%20P1P%20and%20X1%20%23ThangsBambuContest-792313
Compatible Drawers https://www.printables.com/model/451511-bambu-ams-drawer-stand