Dewalt dw708 miter saw dust collection fitting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the dust outlet(Not sure of the actual name) cover for the Dewalt dw708.
- Ocena
- 0 / 5
- Polubienia
- 54
- Pobrania
- 441
- Wydruki
- 0
- Wyświetlenia
- 5357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this model for a past teacher of mine who had two of these saws and the second one was missing the outlet cover. I had to sketch around the outlet because there was no straight line to measure off of. I then imported the picture into SolidWorks to trace around it and make adjustments to it. You will also need a M4 screw and bolt. This model is two separate pieces in the file, so be sure tp split it up.
Print Settings:
- I would recommend supports depending on how you print it.
2. .4 to .6 nozzle
3. Slice everything else as you like
STEP files included
Do not sell