1 / 2
Ford IAC Spacer (80's - 90's Foxbody Mustang, F-Series, Etc)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple 8mm IAC Spacer traced out from a gasket
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 599
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
(Gasket available for Laser/Blade cutting here, also usable if wanting to use sendcutsend to machine an aluminum piece instead of printing just make sure to set it to mm when asked for dimensions).
Simple 8mm spacer for an IAC motor to help with intake clearancing issues. Sketched out the gasket in FreeCAD then padded by 8mm.
Would recommend printing in Nylon or greater for heat resistance.
Print Settings
Supports: None
Infill: 100%