Liczymy pasujące modele…
Print this in something tough, I had to beef up this bracket a lot more than the OEM one because it deals with a lot of force from the cable. It will however work well if printed appropriately.
J'ai voulu réaliser un support d'accu Lipo et de variateur électronique pour le Ford F350 Tamiya.
This allows you to be able to now use your back up camera with a HydraBed bale bed installed. The bottom nut is wide enough for drilling holes for the 3 M3 screws to thread into. The second lock nut has slots cut out for the camera to…
Dieses Modell ist speziell für den Snapmaker A350(T)/F350 entwickelt worden und richtet sich an Nutzer, die ein Upgrade oder eine Erweiterung für den Betrieb mit einem Dual-Extruder suchen. Hauptfunktionen: Passgenau für Snapmaker…
Pimp my box truck lol. Designed to adapt this super slick 10.1" android head unit with dual knobs to the old ford hole. Get a factory quality infotainment retrofit on a budget. This dash and radio commonly found on many motorhomes, work…
The cabs are really high on these trucks and the HydroBed I installed blocks the high mounted stop lamp camera from viewing the bed. This wouldn't be a huge issue, but you can't lean over the seat and see the gooseneck hitch for a…
this is a 3d scan of a 1992 f350. I grabbed this to make a bumper for my buddies truck and figured it might have some use to other people. Have fun! If you make or design something cool, share some pics or screenshots I wanna see what…
Today I had an F650 come into the shop that was missing the lower 2 license plate clips, decided to design and print some up when I was on lunch using a factory clip as a reference. I designed the 5mm hole one originally because I wasn't…
simple wall mount for my daughter's wake up light. You can sling the antenna around it so it won't dangle from the wall. Print instructions Category: Tool Holders & Boxes
I wanted some commercial trucks for my Garden Railroad so I designed this generic Utility body for the 1:27 scale Maisto 1999 Ford F350 Super Duty. Slides in place of the stock bed. No cutting required. May fit other models. Please let me…
Simply a power supply unit (PSU) stand for Snapmaker 2.0 A350/F350
I had a problem with my heat bed cable folding under the bed when it moved to the rear so I designed and printed a strain relief for the cable. The pilot holes are 2mm, but drilled and tapped for 3mm screws. PLA-20% infill.
Original Snapmaker 2.0 enclosure contains a single screw hole where you can optionally mount something. In my case I found it being a convenient place to put filament spool, however only a single screw would make spool arm unreliable and…
Spool hub and side wheel - keeps the filament spool in place and stable, ensures consistent easy rotation as the printer head moves. This should be compatible with most if not all Snapmaker printers that have spool arm design as in…
Bought a new (to me) truck and realized the rear passenger air vents weren't adjusting as they should have. Pulled apart the console and found that the knob that holds a gear mechanism had broken. Rather than try to source a new air vent…
Someone asked me to fabricate a replacement part for their truck based on the remaining original. The original manufacturer didn't appear to have replacements available. Dimensions were taken from measurements of the original. Two models…
A replacement bushing for ford pickup trucks 250-350s 1999-2003 made using TPU With a .8mm nozzle and 100percent infill. I Used a little oil around the opening and worked it until I was able to press it in.
print and slide it on your gyre then you can mount your xf350 on the euro brace
Nachdem ein Originalspiegel damals in irgendeiner Kiesgrube geblieben ist, hatte ich den anderen auch abgenommen, damit es gleich aussieht (?) hmm egal... Nun sind ja wieder welche dran ;) Die "Gläser" sind Extrateile, welche nicht…
Hier hab ich ein Paar Scheibenwischer für den Ford F350 von Tamiya. Der linke ist etwas stärker abgewinkelt, der rechte etwas flacher. Here I have a pair of windshield wipers for the Ford F350 from Tamiya. The one on the left is a little…
for mount, please use VORON one https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/rs25_psu_bracket.stl Use M3x4x5 heatset insert and M3x8 screws laying around on your desk.…
This mod was created in 2015. This mod allows better ground clearance. Because originally motor sits on top of transmission, it needs to be moved to another location - front of the transmission. Motor plate has to be some metal, like…
Double steering servo mount for Tamiya Ford F350 1/10 RC. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Filament: gembird PLA+ black Category: R/C Vehicles
Gearbox servo mount for Tamiya Ford F350 1/10 RC. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Filament: gembird PLA+ black Category: R/C Vehicles
Fender Flares for scale Tamiya Ford F350 1/10 RC. STL files for only left side, mirror these for right side. Print Settings Printer: Iron-M1 Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Filament: gembird TPE black Category: R/C…
Replacement clips that support the arms for the LEER HF350M truck bed cover
I needed a rubber bumper for my OBS F350 hood so I copied one. I printed with Overture TPU with 3 walls and 15% cubic infill. It was a little soft so I would probably try 4 walls and 20% infill. 6 walls and 25% was too much.
I created this mount for my 2013 F-350. It is designed with a recess for 4 BC63 (3/4" x 3/8" x 3/16" thick) neodymium magnets. I epoxied (I used JBWeld) them into place and attached a piece of sticky backed rubber over them to provide a…
This is a replacement part for the sun visor clips which tend to break off on the 2005 Ford F350 Super-Duty truck. The edges are pretty squared off, and I'd meant to clean them up in my next iteration, but surprisingly the first draft…
