2024 F350 HydroBed High Mounted Stop Lamp Camera Relocation Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Relocates the HMSL camera to the HydroBed TM headache rack for bed viewing angle.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
The cabs are really high on these trucks and the HydroBed I installed blocks the high mounted stop lamp camera from viewing the bed. This wouldn't be a huge issue, but you can't lean over the seat and see the gooseneck hitch for a trailer. This kit includes a plug with a hole for the wires to go through at the mount for the camera. It uses a slider to lock and secure the camera inside the mount. I had to lengthen the wires for everything to work correctly. I am happy with how everything came out. Could use some further work. I would recommend printing in PETG. The PLA I used for the test one warped from the heat of a hot summer. I used threaded insert's that the machine screws screw down onto instead of the pressure solely on the plastic on that one, but on the slotted PETG one I did not.