2024 F350 HydroBed High Mounted Stop Lamp Camera Relocation Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Relocates the HMSL camera to the HydroBed TM headache rack for bed viewing angle.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
The cabs are really high on these trucks and the HydroBed I installed blocks the high mounted stop lamp camera from viewing the bed. This wouldn't be a huge issue, but you can't lean over the seat and see the gooseneck hitch for a trailer. This kit includes a plug with a hole for the wires to go through at the mount for the camera. It uses a slider to lock and secure the camera inside the mount. I had to lengthen the wires for everything to work correctly. I am happy with how everything came out. Could use some further work. I would recommend printing in PETG. The PLA I used for the test one warped from the heat of a hot summer. I used threaded insert's that the machine screws screw down onto instead of the pressure solely on the plastic on that one, but on the slotted PETG one I did not.