Ikea BISSA Shoe Cabinet Swivel Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement for the pivot bearing of the Ikea BISSA shoe cabinet
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 209
- Wydruki
- 1
- Wyświetlenia
- 1307
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction:
We are organizing our shoes in an Ikea BISSA shoe cabinet.
Time after time all cabinet doors became harder to open.
When i wanted to repair it i saw that the plastic swivels broke one by one.
So i created a replacement.
Replacement parts:
The replacement is valid for the Ikea BISSA shoe cabinets. The number of doors does not matter. The article numbers are:
105.302.59; 105.302.21 ; 605.302.09 ; 705.302.56 ; 705.302.18 ; 205.302.06
How to:
- Open the cabinet door and unscrew the screw which goes right through the swivel
- Pull out the swivel
- Put the new swivel in
- Screw back the screw (not to tight, otherwise the wood might get ripped of or the swivel will break again)
The screw will cut a little thread in the swivel. This is okay, it shall not fit widely. - Be happy with yourself having something fixed ;-)
You can also see in this video how it's done (around minute 9):
Print settings:
- Support: No
- Infill: Doesn't matter
- Layer hight: For better accuracy take 0,1 mm. 0,2 mm work as well
- Material: I printed in PLA, but PETG, ABS etc should also work fine
If you like my work and want to support it you can do it here:
https://paypal.me/sebastiandruckt 