1 / 7
Voron 0 - Sherpa Mini Mount (Dragon-like Hotend) M2.5 Remix — zdjęcie 1
1 / 7

Voron 0 - Sherpa Mini Mount (Dragon-like Hotend) M2.5 Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed model of @boothyboothy Originla's "Voron 0 - Sherpa Mini Mount" -Dragon hotend mount with bigger mount holes.

Ocena
0 / 5
Polubienia
4
Pobrania
54
Wydruki
0
Wyświetlenia
540
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

-Remix of @boothyboothy (https://www.printables.com/es/@boothyboothy) “Sherpa mini mount for Voron 0” 
-Original: https://www.printables.com/es/model/169127-voron-0-sherpa-mini-mount

I really appreciate the work design and efort putted together on the original model, but in my particular chase, the screw holes are too small for my dragon-like hotend.

Remixed to fit M2.5 6mm length and <5mm screw head.

-Printed as shown, no supports required.

-ABS/ASA.

- Printed with 3 perimeters, 30% infill, 5 top/bottom layers and 0.2mm layer height.

----IMPORTANT----

Follow the instructions of the original model, this file only change the hotend mount part.

 

Thank you, hope it works for you too!

Tagi