4mm Connector Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap assembled housing for 4mm connectors (AKA bullet/banana plug)
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 632
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this plug housing to enclose 4mm bullet / banana-plug connectors for a charge lead adapter for a HOTA D6+ charger. This housing could be useful in any other application where you want to enclose 4mm female connectors.
Print Instructions
Printed in Overture PETG at 0.15mm, 15% infill, & support enforcers on the retaining features of the housing. Could probably try a few more more orientation & support configs to optimize but it serves its purpose as I printed it.
Assembly
The connectors are placed in the inserts and then slid into the outer housing, clicking in place to retain the whole assembly. The inserts have an M3 hole if you prefer eliminate the outer housing and just hold them together with a fastener & nut.