Gira System 55 Rocker (Wippe), various Designs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gira System 55 Rocker (Wippe), various Designs, easy to print, no support needed
- Ocena
- 4,8 / 5
- Polubienia
- 119
- Pobrania
- 742
- Wydruki
- 5
- Wyświetlenia
- 2942
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement socker/switch plate for Gira System 55.
All my original frames, plates and power outlets (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements compared to the original.
Print settings for best results:
- Layer height: 0.2mm
- Line width: 0.4mm
- Support: no support
Print the model with the fron facing surface on the build plate. I use dark gray PLA for best aesthetics. If you want to print the deer version of the rocker, you can first print the deer, change filament and then print the rocker itself. You also can leave the deer blank, so that it will be left out on the first layer (see images).
I've already designed matching frames, power outlets and blind cover. Look into my other models…
Happy printing and leave a make, if it works well for you!