HueForge Toad waving [Multicolor]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HueForge filament painting of Toad waving [Multicolor]
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***
This is one of the toughest HueForge creations I have ever worked on…please let me know how it turns out for you!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Pro Black Transmission Distance: 0.3
PLA PolyLite Brown Transmission Distance: 0.5
PLA Protopasta Cobalt Blue Transmission Distance: 5
PLA PolyTerra Army Brown Transmission Distance: 0.3
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA PolyLite Wine Red Transmission Distance: 1
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA PolyTerra Pastel Peach Transmission Distance: 5
PLA PolyLite Pro White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #18 (1.52mm) swap to Brown
At layer #43 (3.52mm) swap to Cobalt Blue
At layer #58 (4.72mm) swap to Army Brown
At layer #59 (4.8mm) swap to Silver
At layer #73 (5.92mm) swap to Wine Red
At layer #75 (6.08mm) swap to Blue Gray
At layer #76 (6.16mm) swap to Yellow
At layer #86 (6.96mm) swap to Pastel Peach
At layer #90 (7.28mm) swap to White for the rest.