1 / 3
Scale 4 posts lift for garage or Ikea Kallax/Expedit — zdjęcie 1
1 / 3

Scale 4 posts lift for garage or Ikea Kallax/Expedit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Something to store two rc vehicules in one Kallax/Expedit shelve.

Ocena
0 / 5
Polubienia
18
Pobrania
83
Wydruki
0
Wyświetlenia
656
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Needed something to store two vehicules in one Kallax/Expedit shelve.

Hardware required :
12x12x1 (mm) metal tubing cut to fit (235mm was ok for the XV01 and V100 but a bit narrow for the BBX and Scorpion)
4 m3 screw

Print one master (with control-box) and 3 "slave" posts.
Print 4 inserts
Print 2 half ramp

No real need for glue. Ramps may appear flimsy at their connexion but the car's weight is far enough.
Simply cut the metal square tube to length, slide in the inserts at both ends, slide the beam in it's posts and set height with screw.
Assemble ramps and slide them on the beams. Adjust their spacing to taste.

Tagi