HueForge Charmander [Multicolor]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HueForge filament painting of Charmander
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 473
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyTerra Muted Red Transmission Distance: 1
PLA BambuLab Basic Orange Transmission Distance: 10
PLA Protopasta Bottle Brown Transmission Distance: 15
PLA PolyLite White Transmission Distance: 5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA PolyTerra Forest Green Transmission Distance: 0.5
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Muted Red
At layer #32 (2.64mm) swap to Orange
At layer #34 (2.8mm) swap to Bottle Brown
At layer #36 (2.96mm) swap to White
At layer #42 (3.44mm) swap to Savannah Yellow
At layer #43 (3.52mm) swap to Forest Green
At layer #57 (4.64mm) swap to Blue Gray
At layer #58 (4.72mm) swap to White for the rest.