M8 Knob for MFT with threaded insert and washer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this knob to use on an MFT style tabletop, to hold things down. I have tried iterations of this design using…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed this knob to use on an MFT style tabletop, to hold things down.
I have tried iterations of this design using a simple threaded nut, but found that the knob would always break, even with solid wall thicknesses of 3 mm. In this version the contact area between the threaded insert and the knob is greater so it is more likely that the knob will slip in your hand than to break from the torque applied.
The washer is 30 x 8.4 x 2 mm and is a large standard for M8 screws, like this one:
https://www.bauhaus.info/unterlegscheiben-dichtungsringe/profi-depot-karosseriescheibe-vz/p/10826772
The threaded insert I used is 20 mm long and can be screwed using a hex key, like this one:
You will need to turn on supports for this print.
Category: Tools