Liczymy pasujące modele…
Steep and deep hook for your MFT3, to hand onto it whatever you need, from a trash bag to your hearing protection. Nothing will come off. Slides easily onto the Festool MFT3 side rail. Enjoy and posting a make of your print would be…
Dock for holding the DF500 up, to the MFT3 table aluminium profile. Slide the dock then use 2 T-Nut from the festool@ mft accessories, 2 m5 nuts and 5x20mm bolts to hold the dock to the MFT table rail. The DF500 slides and is held tight…
Nachdem ich bei Gehrungsschnitt mit geneigter Säge immer wieder in meine Anschlagschiene geschnitten habe und dadurch die Alu-Schiene immer kürzer wurde, habe ich dieses Austauschteil konstruiert und eingebaut. Material PLA Layerhöhe 0,2…
Alle Teile außer 05_P1 und 05_P11: Material PLA+ Layerhöhe 0,2 mm / Infill 20 % / Support 5% Teil 05_P1 und 05_P2: Material TPU95 Layerhöhe 0,16 mm / Infill 80 % / Support 0% TPU A95 von 3DJake Dieses Filament ist auch druckbar mit…
Material PLA Layerhöhe 0,25 mm / Infill 20 % / Support 5% Zusätzliches Material / additional material: Sechskantschraube / hexagon screw / 2 / M6x20 mm DIN933 Mutter / nut / 2 / M6 DIN934 Gutes Gelingen und über ein Like würde ich mich…
Material PLA+ Layerhöhe 0,16 mm / Infill 25 % / Support 0% Slicingtoleranz “EXKLUSIV” Mein Tipp: Drucke Teile mit Gewinden immer mit Slicing Toleranz „EXKLUSIV“ (Cura). My hint: Print threaded parts with slicing tolerance “EXCLUSIV”…
Material PLA+ Layerhöhe 0,2 mm / Infill 40 % / Support 0% Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be happy about a like.
Anschlag02: Material PLA+ Layerhöhe 0,2 mm / Infill 50 % / Support 5% Knebel: Material PLA+ Layerhöhe 0,16 mm / Infill 100 % / Support 5% Slicingtoleranz “EXKLUSIV” Mein Tipp: Drucke Teile mit Gewinden immer mit Slicing Toleranz…
Festool MFT3 & Ikea Skadis Pegboard Socket ADD-on This extension allows you to equip your multifunction table or Ikea Skadis Pegboard with one or more power outlets. It is especially practical when changing tools, as the connection is…
I really like the Flexible & sturdy phone arm (100% Printed) so I thought mounting it to the MTF3 could be useful, for lights, phones etc. The Nuts from the Festool Bottle holder will work to attach the phone-arm mount-point.
This is a small part for the Festool MFT3. A snapfit holder for the pica-dry pencils. Print it in this orientation:
I've you want to keep your workbench and your tools organized, this toolholder is perfect for you. It can be mountet to the rail of your Festool MFT 3. You just clip the modules together and slide them into the rail. There is also another…
Desk lamp using 2020 profiles and V wheels to adjust easily, it attaches to the festool profile with M5 bolts and T nuts, it can use a pcb inside the 2020 extrusion and a contact brush to not have any hanging cables (just when using 12V…
A fence for holding work in place on the Festool MFT3 table. See the video here https://youtu.be/DNe9TY7jKJg
This is a spoiler for MFT/3 Festool tables to avoid cables to be trapped in the rail support. Ceci est un déflecteur pour les tables MFT/3 Festool qui empêche les cables de se bloquer dans le support du rail. Category: Parts
This tray slides into the rails on the sides of the Festool MTF/3 table. The bottom is curved to help retrieve items in the tray that may otherwise get trapped against the sides. Print stood on its end (standing vertically) and you can…
This is a workbench mount for the MFT3 rail system to hold the Mullet Tools Third Hand Boom Arm. You will also need to purchase the microjig dovetail hardware to mount into the T slots of the table. Or use other Hardware for T slots. Also…
Equerre pour maintenir le rail mft 3 pour le transformer en butée. Il suffit de re faire des trous aligner le support et on se retrouve avec un rail avec butée pour une kapex ;)
These dog feet are designed to hold jigs in place on a bench with MFT3 style dog holes.See the video here: https://youtu.be/9Hs2RRfNoJw
This little bumper helps protecting the aluminum rail of Festool MFT tables. Easy print with no supports, 0.3 mm layer height, 0.4 or 0.6 mm extruder. Update 20231201: Still a WIP Update 20231204: Reduced the tolerance settings…
